Відео

😗

Excellent video and easy to understand. Well done Tiffany! Never thought about using planes this way before so it was good to see a different approach

"go ahead and" is the new "um"

I make lots of videos about Inventor for high school students here in the city of the 2032 Olympics, and you've done a wonderful job. Great pacing, great example, great instructions. I've learnt a lot about linking parameters and lot more about how to make a technical video highly accessible for all types of learners. Top shelf. PS Best bit is I don't have to make an easy-to-understand video because I've got yours to show my crew😉

Interesting take on the automation. I have done automation for different parts over the years. This was an interesting take on it and a different way to think about it. Learn something new everyday.

I have searched the AUTODESK App Store and have not been able to find the Dxf import App. Is the App still available ?

Very good information! I’ve been using iLogic and automation for years but needed a good refresher. Thanks for the great demo❤

😗

How do i name a certain hole to only imate and fill with the required bolt with similar names? Is that possible?

i keep getting an error.......................AFTRevitRCEHost.exe what does this mean?

JUST A COMMENT, ELBOW RL IS A BEND PIPE, AND ELL 90 RL ARE STANDARD 90 ELBOWS IN SPECIFICATION. IF YOU PUT THE FIRST ONES IN THE ISOMETRIC THE LEGEND BEND WILL APPEAR.

I don't see the Parametric tab. Where can I enable it? 18:29

Very interesting tutorial, thank you for sharing

If my z axis elevation is off on my drone scan is it possible for me to correct the elevation if I have survey points that are on the correct elevation?

NICELY DONE

greaT

We are testing version 2025. As far as I can tell, we still cannot manually move parts or manually nest parts one by one. Is this correct?

will the simplified parts mantain the actual COG?

I need Square Extrude profile, can I add in this table

Dear mam, Please do one CFD analysis in ansys as example

full video share

How do i work out the speed of the mutipler curve?

I want to do the simulation of EM wave scattering by artificial magnetic conductor in indoor environment like 35:17. But I can't find detailed tutorial on th Internet. Can you provide more detailed tutorial about this?

plugin doesnt work with inventor newer than 2020.

Im getting the same inertia relief error as you got. How do we remove that error?

I have a total of 104 files.. this took a while..

I also like this cat 😃

i love ur cat sir!!

How do I select faces behind faces? If I use cross section to hide stuff in front of the face I want to select, I can only click on the cross section grid. Im from Fusion360 where I can hide part of the part and select stuff behind it so I'm havng troubles to get used to SpaceClaim. Awsome video and thanks for helping!

Great explanation!!! Thanks!

Thank you

Hello, can you teach me how to do this at the inventor, I also produce iron window doors at the factory and this is the best process

threadModeler no longer compatible with Inventor, well that sucks!

i thought linear tets produce garabage results? Shear locking etc.

Dear sir, Thank you very much about your videos. I have a question sir, What do you think about auto routing with Inventor. Thanks alot !

Impressive demo，totally solve my promblem.

Hi, Great video! Very helpful and easy to understand. I have a question about inputting data files for heat generation rates per volume, particularly when the heat volume changes with usage, such as in battery cells in an EV. If I have a CSV file containing data for heat generation rate (W/m³) and time (seconds), is there a way to input this data and run a simulation? Additionally, I would greatly appreciate a video on CFD simulations for battery thermal heat transfer problems, perhaps covering best practices for such use cases. Thank you!

The man, the myth, the legend! If you never had Ted set you up with Delcam, you missed out on one of life's greatest opportunities

Does it support MBD models generated by Solidworks?

Hello, after using the Design assistant, a big inconvenience happened to me. (I renamed one part of the assembly in DA) Since then, when I open this assembly in Inventor, all the references are lost, if I determine them again and show him where the referenced files are and save it, then when I open the assembly again, the references are missing again . I'm really desperate. Confused Any information on this problem would help me. Thanks for the tips, experience, knowledge on this issue.

I arrived to this video, I need light in the path. I m a lot confused about Model States. Thank you

Делайте пожалуйста субтитры с переводом. Спасибо

Capture Form Inputs and Generate BOMs? Like I have an design and in which I have 80 different variation and also I have created ilogic form for configuations. But If I select BOM it is giving same for all. but i want it for different material or different length bolt. please advice me for this.

Hi, I tried exactly the same thing but my simulation is glitching. Meaning when I drag the cylinder from the flat surface to the curved area, the cylinder behaves abnormally. What could be the reason?

Hello, how do i implement running the vault backup script as shown towards the end of this video? Thanks

hi when you do the second method - multi-body how does it work if you have several of the same part? like in the first example - both long arms are the same part when you create the assembly.

is there an option in put a file into Fluent that has data showing how much heat is made over time? Like an Excel file with numbers for how much heat is made (in watts per cubic meter) at different times (in seconds)?

What if i want to add partial cut in that shaft ?

I love how things always work flawlessly in tutorials. But then, you download an STL file to follow along, and Inventor suddenly gives you error message after error message without providing a way to fix the errant model. Not too crazy about this program.